Occupational Health & Safety Risk Analysis with HIRADC Method in Building Construction Project X

Vidya Amelia Fajar; Koosdaryani Soeryodarundio; Muji Rifai

doi:10.47134/scbmej.v1i4.3121

Authors

Vidya Amelia Fajar Civil Engineering Study Program, Faculty of Engineering, Sebelas Maret University
Koosdaryani Soeryodarundio Civil Engineering Study Program, Faculty of Engineering, Sebelas Maret University
Muji Rifai Civil Engineering Study Program, Faculty of Engineering, Sebelas Maret University

DOI:

https://doi.org/10.47134/scbmej.v1i4.3121

Keywords:

HIRADC, Occupational Health and Safety (OHS), Risk, Work Accidents

Abstract

Within construction projects, there is a risk of workplace accidents that can cause injury and death to workers. These risks are some of the factors that can cause project failure and affect other worker activities. If proper risk control is no carried out the incident can escalate into a fatal work accident. Therefore, good implementation of Occupational Safety and Health (OHS) is essential in every construction project. This research aims to plan work safety using Hazard Identification, Risk Assessment, and Determining Control (HIRADC) method to identify potential hazards, assess the risk of these hazards, and determine appropriate controls to minimize the risks that may occur. In the observed work, the result of hazard identification and risk assessment using the HIRADC method found 22 potential hazards, namely 3 with extreme risk level, and 5 with low risk level. Control were carried out based on the control hierarchy in the form of engineering, administrative, and personal protective equipment (PPE), which succeeded in reducing the risk level so that there were no jobs with extreme and high risk levels. Thus, it can be understood that proper risk control can prevent work accidents.

References

Alexander, H., Nengsih, S., & Guspari, O. (2019). Kajian Keselamatan dan Kesehatan Kerja ( K3 ) Konstruksi Balok Pada Konstruksi Bangunan Gedung. Jurnal Ilmiah Poli Rekayasa, 15(1), 39. https://doi.org/10.30630/jipr.15.1.140 DOI: https://doi.org/10.30630/jipr.15.1.140

Astuti, F. W. D. (2017). Analisis Risiko Kecelakaan Kerja Menggunakan Metode Bowtie Pada Proyek One Galaxy Surabaya. Institut Teknologi Sepuluh Nopember (ITS), 1–127. http://repository.its.ac.id/id/eprint/44441

Handoko, J. C., & Rahardjo, J. (2017). Perancangan Hazard Identification, Risk Assessment, And Determining Control (HIRADC) Di Schneider Electric Cikarang. Risk Assesment and Determining Control, 5(2), 159–164.

Ihsan, T., Hamidi, S. A., & Putri, F. A. (2020). Penilaian Risiko dengan Metode HIRADC Pada Pekerjaan Konstruksi Gedung Kebudayaan Sumatera Barat. Jurnal Civronlit Unbari, 5(2), 67. https://doi.org/10.33087/civronlit.v5i2.67 DOI: https://doi.org/10.33087/civronlit.v5i2.67

Istiqlal, H. G., & Trijeti, T. (2020). Identifikasi Risiko Kecelakaan Kerja Pada Pembangunan Gedung. Seminar Nasional Penelitian LPPM UMJ, 1–8.

Jaya, N. M., Dharmayanti, G. A. P. C., & Ulupie Mesi, D. A. R. (2021). Manajemen Risiko K3 ( Keselamatan Dan Kesehatan Kerja) Pada Proyek Pembangunan Rumah Sakit Bali Mandara. Jurnal Spektran, 9(1), 29. https://doi.org/10.24843/spektran.2021.v09.i01.p04 DOI: https://doi.org/10.24843/SPEKTRAN.2021.v09.i01.p04

Marito Harahap, I., Purwandito, M., Samudra Jl, U., Syarief Thayeb, P., Lama, L., & Langsa, K. (2022). Melalui Metode Hiradc Dan Metode Jsa Pada Proyek Lanjutan Pembangunan Rumah Sakit Regional Langsa. Jurnal Teknik Sipil, 17(2), 43. DOI: https://doi.org/10.21009/jmenara.v17i2.26853

Mentari Ramadhania, Nazarwin Saputra, Dadang Herdiansyah, D. (2021). Analisis Hazard Identification, Risk Assesment, Determining Control (Hiradc) Pada Aktivitas Kerja Di Ud Ridho Abadi Tangerang Selatan Tahun 2020. Environmental Occupational Health and Safety Journal, 2(1), 59–68.

Pamungkas, G. P. P. (2021). Manajemen Risiko Bahaya Berbasis HIRADC (Hazard Identification, Risk Assesment And Determining Control) Pada Pekerjaan Bore Pile (Studi Kasus : Proyek Gedung Sembilan Lantai Universitas Alma Ata Yogyakarta).

Prayogi, I., & Siswoyo, S. (2020). Analisa Risiko Kesehatan Dan Keselamatan Kerja Pada Proyek Pembangunan Perumahan Di Sidoarjo Jatim. Axial : Jurnal Rekayasa Dan Manajemen Konstruksi, 8(1), 35. https://doi.org/10.30742/axial.v8i1.1025 DOI: https://doi.org/10.30742/axial.v8i1.1025

Radityazty Dahayu Nurhayati, & Yayok Suryo Purnomo. (2023). Analisis Risiko K3 dengan Metode HIRADC pada Industri Pengolahan Makanan Laut di Jawa Timur. INSOLOGI: Jurnal Sains Dan Teknologi, 2(3), 450–461. https://doi.org/10.55123/insologi.v2i3.1883 DOI: https://doi.org/10.55123/insologi.v2i3.1883

Ramli, Soehatman (2013). Sistem Manajemen Keselamatan Dan Kesehatan Kerja OHSAS 18001

Saputro, T., & Lombardo, D. (2021). Metode Hazard Identification, Risk Assessment and Determining Control (HIRADC) Dalam Mengendalikan Risiko Di PT. Zae Elang Perkasa. Jurnal Baut Dan Manufaktur, 03(1), 23–29.

Soputan, G., Sompie, B., & Mandagi, R. (2014). Manajemen Risiko Kesehatan Dan Keselamatan Kerja (K3) (Study Kasus Pada Pembangunan Gedung Sma Eben Haezar). Jurnal Ilmiah Media Engineering, 4(4), 229–238.

Supriyadi, W. F., Arifin, T. S. P., & Abdi, F. N. (2023). Analisis Risiko K3 Menggunakan Pendekatan HIRADC dan Metode JSA ( Studi Kasus : Proyek Pembangunan Gedung BPKAD Samarinda ) Abstrak Jurnal Ilmu Pengetahuan dan teknologi sipil. Jurnal Ilmu Pengetahuan Dan Teknologi Sipil, 5(1), 72–81.