Vol. 2 No. 1 (2025): January

Articles

• Analisis Bottleneck dan Kapasitas Mesin Untuk Meningkatkan Efisiensi Produksi Cup Plastik di PT 'X'

  Evelyn Agustin, Daniel Marcello, Muhammad Ferdy Setiawan, Michael Valentino Diamond

  • PDF

  Evelyn Agustin,  Teknik Industri, Universitas Katolik Musi Charitas,  Indonesia

  Daniel Marcello,  Teknik Industri, Universitas Katolik Musi Charitas,  Indonesia

  Muhammad Ferdy Setiawan,  Teknik Industri, Universitas Katolik Musi Charitas,  Indonesia

  Michael Valentino Diamond,  Teknik Industri, Universitas Katolik Musi Charitas,  Indonesia

  Abstract views : 1688 times | Downloads: 2110 times | DOI : https://doi.org/10.47134/jme.v2i1.3537
  

• Analisis Efektivitas Mesin Produksi Menggunakan Metode OEE pada Industri Makanan: Studi Kasus di PT "Y"

  Mickhael Apriliano Lie

  • PDF

  Mickhael Apriliano Lie,  Universitas Katolik Musi Charitas,  Indonesia

  Abstract views : 2834 times | Downloads: 2111 times | DOI : https://doi.org/10.47134/jme.v2i1.3966
  

• Penerapan RCCP dan TOC untuk Optimalisasi Stasiun Kerja dalam Proses Produksi di Bengkel Cor Logam Sentosa Jaya

  Seli, Petra Putri Ardika, Afifah, Clara Anggraiyani

  9

  • PDF

  Seli,  Universitas Katolik Musi Charitas,  Indonesia

  Petra Putri Ardika,  Universitas Katolik Musi Charitas,  Indonesia

  Afifah,  Universitas Katolik Musi Charitas,  Indonesia

  Clara Anggraiyani,  Universitas Katolik Musi Charitas,  Indonesia

  Abstract views : 610 times | Downloads: 968 times | DOI : https://doi.org/10.47134/jme.v2i1.3578
  

• Sandwich Structure Bending Analysis using Finite Element Analysis

  Haidar Faisal Helal Mobark, Mothanna Taha Mohammed Fattah Agha, Lekaa Hammed, Sarkaut Ahmed Ameen

  10

  • PDF

  Haidar Faisal Helal Mobark,  Department of Soil Sciences and Water Resources, College of Agriculture, Al-Qasim Green University, Babel, Iraq,  Iraq

  Mothanna Taha Mohammed Fattah Agha,  Department of Soil Sciences and Water Resources, College of Agriculture, Al-Qasim Green University, Babel, Iraq,  Iraq

  Lekaa Hammed,  Mechanical Engineering Department Engineering College, University of Babylon, Babel, Iraq,  Iraq

  Sarkaut Ahmed Ameen,  Automotive Technology Engineering Department, Erbil Technology College, Erbil Polytechnic University, 44001 Erbil, Iraq,  Iraq

  Abstract views : 854 times | Downloads: 453 times | DOI : https://doi.org/10.47134/jme.v2i1.3396
  

• Predicting The Residual Performance Resource of Pneumatic Tires

  Melibayev Maxmudjon, Dadaxodjaev Anvar, Mamadjanov Ma’ruf Mahmudjanovich

  12

  • PDF

  Melibayev Maxmudjon,  Namangan Construction Engineering Institute,  Uzbekistan

  Dadaxodjaev Anvar,  Namangan Construction Engineering Institute,  Uzbekistan

  Mamadjanov Ma’ruf Mahmudjanovich,  Namangan Construction Engineering Institute,  Indonesia

  Abstract views : 247 times | Downloads: 239 times | DOI : https://doi.org/10.47134/jme.v2i1.3704