Studi Perancangan Kursi Dingklik Ergonomis untuk Montir Bengkel Resmi "X"

Evelyn Agustin; Michael Valentino; Clara Anggrayani N.; Ruben Baraja Eglesias Napitu

doi:10.47134/pjise.v1i2.2383

Authors

Evelyn Agustin Teknik Industri, Universitas Katolik Musi Charitas
Michael Valentino Teknik Industri, Universitas Katolik Musi Charitas
Clara Anggrayani N. Teknik Industri, Universitas Katolik Musi Charitas
Ruben Baraja Eglesias Napitu Teknik Industri, Universitas Katolik Musi Charitas

DOI:

https://doi.org/10.47134/pjise.v1i2.2383

Keywords:

Kursi Dingklik Ergonomis, Ergonomis, Antropometri, Ergonomic Function Deployment (EFD)

Abstract

Bengkel resmi adalah tempat kerja yang memberikan perhatian khusus pada kesehatan dan produktivitas para montir. Penelitian ini dilakukan di bengkel resmi "X", yang terletak di Jl. MP. Mangkunegara No.14-15, Bukit Sangkal, Kecamatan Kalidoni, Kota Palembang, Sumatera Selatan. Penelitian ini bertujuan untuk merancang kursi dingklik ergonomis untuk montir di bengkel resmi "X". Tujuan spesifiknya adalah mengkaji keluhan para montir, mengamati postur kerja dan menentukan dimensi tubuh yang digunakan sebagai dimensi ukuran kursi dingklik. Bukti dari evaluasi RULA menunjukkan skor sebesar 7. Oleh karena itu, metode Ergonomic Function Deployment (EFD) digunakan untuk merancang produk yang optimal serta memastikan kenyamanan pengguna di stasiun kerja bengkel "X". Dalam perancangan stasiun kerja bengkel yang ergonomis, perhitungan antropometri sangatlah penting. Dengan mempertimbangkan lebar alas kursi dingklik yang diperkirakan sebesar 42,81 cm dan tinggi kursi yang dapat disesuaikan antara 30,62 hingga 37,98 cm, serta panjang alas kursi sekitar 43,46 cm dengan sandaran punggung mencapai 50,96 cm, kursi dingklik yang dapat disesuaikan ini dirancang untuk memberikan dukungan optimal kepada pengguna dengan memperhatikan kebutuhan fisik dan ergonomis pekerja.

References

Babu, R., & Hedge, A. (2009). Ergonomics of the office and workplace: An overview. CRC Press.

Bridger, R. S. (1995). Introduction to ergonomics. Applied Ergonomics, 26(4), 307-308. DOI: https://doi.org/10.4324/9780203426135

Carayon, P. (2006). Human factors in organizational design and management - VIII. Elsevier.

Chaffin, D. B., Andersson, G. B., & Martin, B. J. (2006). Occupational biomechanics. John Wiley & Sons.

Cho, C. Y., Hwang, Y. S., & Cherng, R. J. (2018). Musculoskeletal symptoms and associated risk factors among office workers with high workload computer use. Journal of Manipulative and Physiological Therapeutics, 41(5), 352-358.

David, G. C. (2017). Ergonomic methods for assessing exposure to risk factors for work related musculoskeletal disorders. Occupational Medicine, 57(2), 202–210. https://doi.org/10.1093/occmed/kqm162 DOI: https://doi.org/10.1093/occmed/kqm162

Eastman, K. (2010). Ergonomic function deployment (EFD): A tool for integrating cognitive ergonomics analysis into the systems engineering design process. In International Conference on Human Interface and the Management of Information (pp. 409-417). Springer, Berlin, Heidelberg.

Eastman, R. D. (2010). Ergonomics function deployment: A process for delivering customer driven quality in product and service design. CRC Press.

Freedman, D., Pisani, R., & Purves, R. (2007). Statistics. New York, NY: Norton & Company.

Helander, M. G. (2006). A guide to human factors and ergonomics (2nd ed.). CRC Press. DOI: https://doi.org/10.1201/b12385

Hedge, A., & Powers, J. R. (2004). Working postures and physical activity among motorcycle repair and maintenance workers. International Journal of Industrial Ergonomics, 34(2), 147-157.

Hedge, A., Babu, R. (2009). Ergonomics of the office and workplace: An overview. CRC Press.

Hignett, S., McAtamney, L., & Buckle, P. (2017). Working with VDUs. Oxford: Butterworth-Heinemann.

Ikhsan, M. (2019). Penerapan metode ergonomic function deployment (EFD) dalam pengembangan produk. Jurnal Teknik Industri, 10(2), 45-58.

Karahan, A., Kav, S., & Abbasoglu, A. (2009). The effects of workplace risk factors on the occurrence of work-related musculoskeletal disorders among dental professionals. Applied Ergonomics, 40(4), 625-634.

Kilpatrick, P., Hjelm, J., & Lee, J. (2008). Ergonomics in the design of new and retrofit products. CRC Press.

Kumar, S. (2017). Ergonomics: Beyond the basics. CRC Press.

Kumar, S., & Kumar, A. (2019). Ergonomic interventions for improving working postures

associated with musculoskeletal disorders among computer users: A systematic review. Work, 62(1), 95-111.

Lohman, T. G., Roche, A. F., & Martorell, R. (1988). Anthropometric standardization reference manual. Human Kinetics Books.

Marras, W. S., & Karwowski, W. (2006). Occupational ergonomics: Design and management of work systems. CRC Press.

Montgomery, D. C. (2012). Introduction to statistical quality control (7th ed.). John Wiley & Sons.

Pheasant, S., & Haslegrave, C. M. (2005). Bodyspace: Anthropometry, ergonomics and the design of work (3rd ed.). CRC Press. DOI: https://doi.org/10.1201/9781420055948.ch26

Porter, J. M., & Case, J. G. (2010). The average American: Anthropometric data for consumer product design. Ergonomics, 53(8), 973-983.

Toomingas, A., Forsman, M., Mathiassen, S. E., Heiden, M., Nilsson, T., & Forsman, M. (2020). Evaluation of work technique and physical workload when using ergonomic designed floor-mounted and overhead-mounted mechanics. Applied Ergonomics, 82, 102963.

Waters, T. R., Putz-Anderson, V., Garg, A., & Fine, L. J. (1993). Revised NIOSH equation for the design and evaluation of manual lifting tasks. Ergonomics, 36(7), 749-776. DOI: https://doi.org/10.1080/00140139308967940